With the continuous progress of society, the world continues to develop. Everywhere in the city can be filled with the presence of prestressed steel strands. People have flesh and bones. Steel strands are like buildings or other equipment bones that can use it. The products of steel strand manufacturers are extremely hard. As a kind of steel product, steel strand is made of multiple steel wires and is often used in bridges, construction, water conservancy, energy and geotechnical engineering. Tianjin prestressed anchors are actually very knowledgeable when they are used and stored. There are strict regulations on the selection of steel strand manufacturers to the location of warehouses.
When people purchase, they should select samples and send them to relevant units for corresponding testing. Only after the testing is qualified can they be included in the actual purchase consideration, so that they can place an order. After the delivery, the steel strand manufacturer must check each point where the prestress is used one by one to confirm that the steel angle wire anchoring is safe. When prestressed steel strands are stored, a suitable warehouse should be selected. There should be a sufficiently good ventilation environment. The ground should be hardened with equipment to ensure drainage of the surrounding area. The wire reels should also be made of square wood under the steel strands. Pad up. A batch of steel strands needs to be stored separately.
There should be no dirt, such as dirt, and oil stains should be cleaned up before storage. When cutting, try to ensure that the length of the steel strand is consistent. The stranded wire should be dropped as it is used when it is used for cutting, so as to effectively reduce the rust ratio of the stranded wire.